Albadarin, AB,Mo, JB,Glocheux, Y,Allen, S,Walker, G,Mangwandi, C

2014

November

Chemical Engineering Journal

Preliminary investigation of mixed adsorbents for the removal of copper and methylene blue from aqueous solutions

Published

()

Multi-adsorbents Wastewater Adsorption technique Heavy metals Dyes ACTIVATED CARBON DYE ADSORPTION HEAVY-METALS DOLOMITIC SORBENTS REACTIVE DYE TEA LEAVES BASIC DYE COMPOSITE KINETICS WASTE

255

525

534

With most recent studies being focused on the development of advanced chemical adsorbents, this paper investigates the possibility of using two natural low-cost materials for selective adsorption. Multi-adsorbent systems containing tea waste (TW) and dolomite (DO) have been tested for their effectiveness in the removal of copper and methylene blue from aqueous solutions. The effects of contact time, solution pH and adsorption isotherms on the sorption behaviour were investigated. The Langmuir and Freundlich isotherms adequately described the adsorption of copper ions and methylene blue by both materials in different systems. The highest adsorption capacities for Cu and MB were calculated as 237.7 mg/g at pH 4.5 and 150.4 mg/g at pH 7 for DO and TW:DO respectively. Tea waste and dolomite were characterised by Fourier transform infrared spectroscopy, scanning electron microscopy and Energy dispersive X-ray analysis. The removal of Cu and MB by dolomite was mainly via surface complexation while physisorption was responsible for most of the Cu and MB adsorption onto tea waste. Identifying the fundamental mechanisms and behaviour is a key to the development of practical multi-adsorbent packed columns. (C) 2014 Elsevier B.V. All rights reserved.

10.1016/j.cej.2014.06.029